The True Stone Production Process

From Quarry to Kitchen

After approval of our estimate, production on your stone work begins. The material you selected is pulled from storage and your job is assigned to one of our master craftsmen.

Left: A template on a raw piece of marble.  Right: One of our bridge saws.

The stone is then placed on one of our large bridge saws where it is cut into the general shapes needed for your project. The stone is cut using a large, high speed, water cooled, diamond saw blade that is capable of cutting through even the hardest granites. At this point stabilizing rods are cut and glued into the stone so that this delicate product can survive through the somewhat harsh production process.

Left: Stabilizing rods being glued into granite.  Right: White marble after being cut.

Once the basic shapes needed for your job are cut, depending on the edge thickness and style it will either be laminated or mitred. For 1½" edge jobs a second piece of the same stone is laminated under front edges of the main piece. This gives the front edge a thicker look and allows for a larger edge detail. For mitered jobs, the stone is put on our Park Industries Miter Bridge Saw, where the edges are cut at corresponding 45° angles and then glued together at a right angle. This gives a smooth front edge look that is consistent and doesn't have any of the edge seams that can be found on other edge types. Projects using a ¾" edge will skip this step and go directly to having their edges cut and polished.

Left: Our mitre saw cutting a 45° angle.  Right: Laminating a piece of granite.

Now that the stone has been laminated/mitered, the pieces will move on to our CNC (Computer Numerical Control) machine for sinks and edges to cut. We use a Prussiani Oceania Elite Router center which allows us outstanding accuracy and consistency. Accurate to fractions of a millimeter and fully automated, this machine is another one of the high quality and high tech pieces of equipment True Stone uses to make your stone project beautiful.

Left: High speed diamond cutters cutting an edge profile.  Right: Our high-tech Prussiani CNC router center.

Once the pieces finish on the machine or have had their edges finished by hand, the pieces are checked for consistency and polished if necessary. Spaces for cook tops are cut, holes for fixtures drilled, and other final additions to the stone are made.

Left: A piece of Statuary Marble being mitered.  Right: Polishing Costa Esmeralda granite by hand.

Now your stone work is complete! Our production manager checks the stone quality and craftsmanship one last time, and then the project is loaded onto our trucks to be installed.